Manual Do Satellite Finder
Satfinder user guide wiring and operation: 1. connect a jumper cable from the lnb to the satellite finder’s “to lnb” input. 2. connect the “to rec” to 13-18v dc power which comes from the satellite receiver.. A satellite finder meter is a specialized device designed to help you position your satellite dish to receive the strongest signal for best television reception. they are simple to operate and are designed to be used while you're at the satellite dish so you don't have to check your signal strength at your television set.. When installing a digital satellite dish one of the challenges is to pinpoint the signals coming from the sky. you can use the signal strength meter on your receiver hooked up to your television, but that would require you to leave the dish and go inside to check the signal..
Digital satellite finder user’s manual please read this manual carefully before using this device for the first time. the technical specifications and operating methods included in this manual are subject to changes without notice. in case of any inquires after a period 1. Mx satellite finder is used to detect the satellite signal coming from satellite. mx satellite finder also detects the strength on the signal and gives the reading in meter accordingly.. Digital satellite finder 1 1 guide 1.1 important safety instructions thank you for choosing our product. before installation, we would like to remind you some notes, which is very important for operating safely and properly, as follows: gbe sure to read this user manual before starting your operation..